Certified Scalmalloy (A)

Highly strength aluminum with excellent corrosion resistance

Scalmalloy bridges the gap between traditional aluminum cast alloys (for example, AlSi10Mg) and Ti Gr23, and provides a combination of high specific strength (strength-to-weight ratio), excellent corrosion resistance, and good thermal and electrical conductivity.

Applications include:

• Structural components that require high strength-to-weight ratios in the aerospace, motorsports, semiconductor machinery, and transportation industries
• Fluid flow applications with corrosion resistance and strict purity requirements
• Load-bearing, safety-critical parts
• Scalmalloy is an approved material under the FIA regulations

LaserForm AlSi7Mg0.6 (A)

Light weight, good mechanical properties and improved thermal conductivity

Aluminum alloy with a combination of good mechanical properties and good thermal and electrical conductivity.

Applications include:

• Light weight parts for aerospace and automotive
• Innovative approaches to mold design
• Heat exchangers (HEX)

LaserForm AiSi10Mg (A)

Good mechanical properties and good thermal conductivity

Aluminum alloy with a combination of good mechanical properties and good thermal conductivity.

Applications include:

• Light weight parts for aerospace and automotive
• Innovative approaches to mold design
• Heat exchangers (HEX)

LaserForm 316L (A)

Able to be sterilized and highly corrosion resistant

Extra low carbon grade stainless steel 316, parts can be machined, spark-eroded, welded, shot-peened, polished and coated if required. For parts that need to be sterilized and highly corrosion resistant.

Applications include:

• Small to medium series parts, requiring high corrosion resistance and are sterilizable
  • Pharmaceutical industry
  • Food machinery
  • Chemical industry
  • Process industry
• Medical tools

LaserForm 17-4PH (A)

Excellent corrosion resistance, high strength with good toughness

Metal powder for parts with an outstanding combination of excellent corrosion resistance and high strength with good toughness.

Applications include:

• Components for:
  • Aerospace
  • Chemical
  • Petrochemical
• Surgical instruments (sterilizable)
• General metalworking applications

LaserForm Maraging Steel (A)

Excellent hardness and strength, good wear resistance

Genuine tool steel (1.2709) for direct production of tools and molds as well as high-performance parts that require high strength and hardness. Shows good weldability and machinability.

Applications include:

• Innovative tool and mold designs including conformal cooling channels for injecting molding, die casting and extrusion
• High-performance industrial parts, e.g. tire manufacturing and automotive
• High-wear components
• Aerospace components

Certified M789 (A)

Cobalt free, high strength tool steel with excellent corrosion resistance

M789 is maraging steel with a combination for high hardness with excellent corrosion resistance, specifically optimized for laser powder bed fusion processes.

Applications include:

• Mold inserts with conformal cooling channels
• Drilling and cutting tools
• Tire molds and tire sipes
• Drive train parts, e.g.  axle components
• Replacement  and custom machinery components subject to wear
• Complex drill heads for oil and gas applications

LaserForm Ni625 (A)

Excellent corrosion resistance, high strength and heat resistance

Nickel super alloy for industries where excellent corrosion resistance and a combination of high strength and heat resistance are key.

Applications include:

Components for:

• Aerospace industry
• Chemical industry
• Marine industry
• Nuclear industry
• Automotive and racing

LaserForm Ni718 (A)

Oxidation, corrosion and extremely high-temperature resistant

Oxidation and corrosion-resistant inconel alloy, suited for service in extreme environments subjected to pressure and heat. Attractive for high-temperature applications where aluminum and steel would succumb to creep.

Applications include:

• High temperature applications such as :
  • Components for liquid fueled rockets
  • Rings, casings and formed sheet metal parts for aircraft and land-based gas turbine engines
  • Cryogenic tankage
• Fasteners and instrumentation parts

LaserForm Ti Gr1 (A)

Light weight, biocompatible, extreme temperature and corrosion resistance

Titanium alloy with excellent biocompatibility and low stiffness, featuring light weight with extreme temperature and corrosion resistance, and high ductility, perfectly suited for medical applications and implants, motor sports, marine aerospace and aviation applications.

Applications include:

• Medical applications and implants
• Applications where light weight with extreme temperature and corrosion resistance, and high ductility are key:
  • Aerospace parts
  • Motorsports components
  • Marine parts
  • Premium sporting goods

LaserForm Ti Gr5 (A)

High strength, low weight, excellent biocompatibility

Titanium alloy with high strength, low weight and excellent biocompatibility for technical and medical applications similar to LaserForm Ti Gr23 (A) but with higher strength.

Applications include:

• Light-weight and high-strength components for aerospace, sports and marine applications
• Medical implants
• Medical tools and devices
• Dental prostheses

Extra High Productivity Upgrade

For high speed metal printing – with laser quality

• Upgrade to LaserForm Ti Gr5 (A) and Ti Gr23 (A) print parameter set in 3DXpert software
• Considerably reduces cost per part
• Maintains high level of repeatable part quality consistent with published LaserForm data sheets
• Up to 34% reduction in printing times

LaserForm  Ti Gr23 (A)

High strength, low weight, excellent biocompatibility – lower Oxygen than Gr5

Titanium alloy with high strength, low weight and excellent biocompatibility for technical and medical applications, similar to LaserForm Ti Gr5 (A) but with lower oxygen content.

LaserForm CoCrF75 (A)

Highly corrosion, wear and heat resistant. Bio-compatible

Cobalt chrome alloy for industrial parts with high corrosion and wear resistance that requires high temperature resistance.

Applications include:

• Medical tools and devices
• Molds and dies
• Industrial, high wear applications
• Parts requiring high strength at elevated temperatures
• Dental implants and prostheses

LaserForm AlSi12 (B)

Metal powder for light weight parts with good thermal properties

Metal powder for light weight parts with good thermal properties and a high strength to weight ratio for industrial grade prototypes, production parts and spare parts. Also for thin-walled parts such as heat-exchangers.

Applications include:

• Industrial grade prototypes, production parts or spare parts for
  • Automotive
  • Aerospace
  • Machinery
• Thin walled parts such as heat exchangers

LaserForm 316L (B)

Able to be sterilized and highly corrosion resistant

Extra low carbon grade stainless steel 316. Parts can be machined, sparked-eroded, welded, shot-peened, polished and coated if required. For parts that need to be sterilized and highly corrosion resistant.

Applications include:

• Small to medium series parts, requiring high corrosion resistance and are sterilizable
  • Pharmaceutical industry
  • Food machinery
  • Chemical industry
  • Process industry
• Medical tools

LaserForm 17-4PH (B)

Excellent corrosion resistance, high strength with good toughness

Metal powder for parts with an outstanding combination of excellent corrosion resistance and high strength with good toughness.

Applications include: 

• Components for:
  • Aerospace
  • Chemical
  • Petrochemical
• Surgical instruments (sterilizable)
• General metalworking applications

LaserForm Maraging Steel (B)

Genuine tool steel (1.2709), high strength and hardness

For direct production of tools and molds as well as high performance parts that require high strength and hardness

Applications include:

• Tools and molds for injecting molding, die casting and extrusion
• High-performance industrial parts, e.g. tire manufacturing and automotive
• High-wear components
• Aerospace components

LaserForm Ni625 (B)

Excellent corrosion resistance, high strength and heat resistance

Nickel super alloy for industries where excellent corrosion resistance and a combination of high strength and heat resistance are key.

Applications include:

Components for:

• Aerospace industry
• Chemical industry
• Marine industry
• Nuclear industry
• Automotive and racing

LaserForm CoCr (B) or (C)

Highly corrosion and wear resistant, suitable for biomedical

Metal powder for highly corrosion-and-wear resistant industrial parts that require high temperature resistance, suitable for biomedical applications.

Applications include:

LaserForm CoCr (B) – for use with ProX DMP 100, 200 and 300

• Turbine and engine components
• Design and watchmaking products
• Parts with thin walls or fine features
• Mechanical components needing wear and corrosion resistance

LaserForm CoCr (C) – for use with ProX DMP 100 and 200 Dental

• Dental production applications like copings, bridges and partials